OYP7000 Flat Bed Cremator
OYP7000 Flat Cremation Furnace is a civilized and humane energy-saving automatic cremation furnace.
It is a civilized and humanistic energy saving automatic cremator. The new type signs that cremators made in China get to the new stage. The ash is picked up by the relative that represents civilization and humanization. And it supply the new, high-quality and warmly service to high-class funeral parlor. The structure and technology of the products get the most advanced international level.
1.Double direction caterpillar corpse carrier-Patented product, featuring a front hall without tracks or trailing wires, and decorated with high-quality stainless steel. The design is innovative, the structure is simple, the operation is stable, and the appearance is aesthetically pleasing and generous.
2.Front loading and back cleaning-In front of the cremator, there is a two-way crawler conveyor to transport the remains and coffins into the furnace of the cremator. After the cremation is completed, the cremator cleans the ashes from the back of the cremator.
3.Automatic control-LCD touch screen, industrial PLC automatic control system makes operation simple and stable performance.
The microprocessor temperature controller with digital readout ensures the best control while providing the lowest energy consumption.
The LCD touch screen control panel provides visual verification of each stage.
The operator realizes automatic and automatic control of the board by turning the semi-manually controlled switch.
3.Flue Gas Waste Heat Utilization Design-First introduced by OY, this design allows the waste heat after combustion to be recovered through the waste heat device. The recovered waste heat is used to heat the combustion air, reduce fuel consumption, and extend the life of the furnace.
4.Double-layer loading door-It consists of an inner furnace door and an outer furnace door. The inner furnace door is made of stainless steel frame, filled with high temperature resistant aluminum silicate fiber, and can bear the high temperature of 1800℃ in the furnace.
The outer furnace door is made of stainless steel and has a beautiful and hygienic appearance.
The inner furnace door can provide better fuel efficiency and longer refractory life.
The furnace door is controlled by a visual touch screen panel. This function allows the operator to open the door to the desired height from the control panel.
For heavy loads, this is an important safety feature.
5.Multi-combustion chamber design-The furnace body of the cremator includes a main combustion chamber and a secondary combustion chamber. The combustion process is completed in the air control chamber to eliminate combustion in the chimney and provide higher fuel efficiency than the excess air design.
6.Furnace body is all stainless steel decoration-Our classic furnace body is designed with all stainless steel gussets and carbon steel sprayed appearance design.
We also provide customized colors to reflect your company.
7.Refractory materials-Our unique feature is that all combustion chambers use high-strength refractory walls, and all non-insulated areas use high-strength bricks of 3,000 degrees Fahrenheit.
The furnace chamber is cast from 3,000 degrees Fahrenheit wear-resistant materials, and the main furnace chamber ceiling is made of insulating refractory bricks to provide better fuel efficiency and life.
8.Refractory lined chimney-Provides a three-inch refractory insulation lining as a safety feature.
Although the smoke rarely exceeds 1,000 degrees Fahrenheit, the refractory insulation lining reduces heat penetration under any circumstances and prevents the possibility of fire.
9.Start-up support-It is our responsibility to make the equipment start-up easy. The equipment we provide has passed complete piping, testing and wiring before leaving the factory.
Length:3450 mm
Width:2280 mm
Height:2540 mm (3180 mm with Doorcap)
Weight:<18000 kg
Operation Observation Door :W×H=240 mm × 140mm
Door Opening:W×H=1020 mm×1000 mm
Gas Pressure:Natural Gas: 1.74 kPa W.C.
Propane Gas: 2.74 kPa W.C.
Power Requirements:380 V, 18kW
Body Weight Capability:275 kg
Cremation Rate:90 kg/hr
Stack Height From Ground:9000 mm
Stack Sections:Diameter 500
Chamber Dimensions:L×W×H=2300 mm×696mm×
876mm
Burner Output:Afterburner Maximum: 1,055,055.85 kJ per Hour
Cremation Burner: 527,527.93 kJ per Hour
Ignition Burner: 316,516.76 kJ per Hour
Maximum Input Rating: 1,582,583.78 kJ per Hour
Air Requirements:Outside air inlet louvers in the room located
at or below burner height, capable of passing
70.79 m³ per minute of free air.
